| T O P I C R E V I E W |
| Neytan |
Posted - 11/19/2014 : 09:47:05 AM
Good time to everyone!
Please, help with a few very simple for many of you question:
1) How could i multiply 2 column (B) from 2 other workbooks OR worksheets? OR better - how multiply all graphs (on 1 graph layer) on my important book with col(B)?
2) How could i delete special rows (comments, sparklines, etc.) and a first 5 and last 5 rows (full numbers of rows - 305)?
Thank you
Alex |
| 8 L A T E S T R E P L I E S (Newest First) |
| Neytan |
Posted - 12/19/2014 : 07:12:17 AM
quote:
Originally posted by jasonzhao
Hello,
You can use a if statement to pass the specific object.
eg:
doc -e LB
{
if(%H!="Book1") //if you don't want to plot Book1
plotxy iy:=(1,2) plot:=200;
}
doc -e w // loop through all book in project
{
if(%H!="GeSens") //if you don't want to devide BeSens_B
[%H_B]/=GeSens_B; //%H contained name of each book set;
[%H_B]=;
}
Best regards,
Jason Zhao
OriginLab Tech Service
Hi! Thank you for your reply!
I could't have done with my work without your help! Thank you so much, jasonzhao!
|
| jasonzhao |
Posted - 12/14/2014 : 08:16:05 AM
Hello,
You can use a if statement to pass the specific object.
eg:
doc -e LB
{
if(%H!="Book1") //if you don't want to plot Book1
plotxy iy:=(1,2) plot:=200;
}
doc -e w // loop through all book in project
{
if(%H!="GeSens") //if you don't want to devide BeSens_B
[%H_B]/=GeSens_B; //%H contained name of each book set;
[%H_B]=;
}
Best regards,
Jason Zhao
OriginLab Tech Service |
| Neytan |
Posted - 12/03/2014 : 03:53:54 AM
quote:
Originally posted by jasonzhao
Hello, please see the answers list below:
- Please try the script for multiply:
doc -e w // loop through all book in project
{
[%H_B]*=GeSens_B; //%H contained name of each book set;
[%H_B]=;
};
GeSens_B=sqrt(GeSens_B);
- For color changing follows the "Increment" you can use the script below:
int i=2;
doc -e d{
set %C -c $(i);
i++;
}
However, the Edit Mode in Group tab in Plot Details(Plot Properties) dialog should be independent.
- As for sparklines settings, please run this commend, and refer to page http://www.originlab.com/doc/X-Function/ref/sparklines:
sparklines -d;
Best regards,
Jason Zhao
OriginLab Tech Service
Good time!)
Thank you, so much! All working! And im very happy!)
But, if I want "division operation" instead of "multiplication", column "GeSens_B" divided on itself. Why? How could i save this column "GeSens_B"?
And one more:
If I have 6 workbooks (2 cols) and want to plot only 5. How could i do that? PS I know workbook name which should not plot. (Book2,3,...,Testbook) |
| jasonzhao |
Posted - 11/23/2014 : 9:52:26 PM
Hello, please see the answers list below:
- Please try the script for multiply:
doc -e w // loop through all book in project
{
[%H_B]*=GeSens_B; //%H contained name of each book set;
[%H_B]=;
};
GeSens_B=sqrt(GeSens_B);
- For color changing follows the "Increment" you can use the script below:
int i=2;
doc -e d{
set %C -c $(i);
i++;
}
However, the Edit Mode in Group tab in Plot Details(Plot Properties) dialog should be independent.
- As for sparklines settings, please run this commend, and refer to page http://www.originlab.com/doc/X-Function/ref/sparklines:
sparklines -d;
Best regards,
Jason Zhao
OriginLab Tech Service |
| Neytan |
Posted - 11/21/2014 : 08:05:27 AM
quote:
Originally posted by jasonzhao
Hello,
As you pointed out, the loop object is each book, so I modify the script,which excute the operation
Book1_b*Book3_b, then Book2_b*Book3_b. the result saved in book3_b
win -a book1;// active book1
doc -e w // loop through all book in project
{
book3_B*=[%H_B]; //%H contained name of each book set;
%H_B=;
}
book3_B=sqrt(book3_B); // devided by itself
As for the comments row, please refer to this page:
http://www.originlab.com/doc/LabTalk/guide/Accessing-Metadata
and try to active the sheet, use script below to hide the comment row:
range ww = !;
ww.labels(LU);
Besides, you can set the line color in this way:
plotxy iy:=(1,2) plot:=200 color:=color(0,49,83); //set RGB color
Best regards,
Jason Zhao
OriginLab Tech Service
Thank you for your reply.
*Thanks for special row's hide code! :) (but would better if removing)
*BUT Unfortunately all graphs drawing by one color. If I have 5-10 graphs Im wanting 5-10 different colors for these graphs. All plots on 1 graph layer . How could I do it?
*And about multiply... Its not that i want. I need these:
[GalogenLampSi_B]=[GalogenLampSi_B]*[GeSens_B]
[GalogenLamp1_B]=[GalogenLamp1_B]*[GeSens_B]
[GalogenLamp(etc.)_B]=[GalogenLamp(etc.)_B]*[GeSens_B]
*How could I change height of sparklines without attention window and change legend labels (Name of file + my comments)?
Alex |
| jasonzhao |
Posted - 11/21/2014 : 02:07:51 AM
Hello,
As you pointed out, the loop object is each book, so I modify the script,which excute the operation
Book1_b*Book3_b, then Book2_b*Book3_b. the result saved in book3_b
win -a book1;// active book1
doc -e w // loop through all book in project
{
book3_B*=[%H_B]; //%H contained name of each book set;
%H_B=;
}
book3_B=sqrt(book3_B); // devided by itself
As for the comments row, please refer to this page:
http://www.originlab.com/doc/LabTalk/guide/Accessing-Metadata
and try to active the sheet, use script below to hide the comment row:
range ww = !;
ww.labels(LU);
Besides, you can set the line color in this way:
plotxy iy:=(1,2) plot:=200 color:=color(0,49,83); //set RGB color
Best regards,
Jason Zhao
OriginLab Tech Service |
| Neytan |
Posted - 11/20/2014 : 05:44:17 AM
quote:
Originally posted by jasonzhao
Hello,
Please try the script below:
the script plus all datasets in book1 with book2_A, save results in boo2_A
win -a book1;// active book1
doc -e d // loop through all dataset in active sheet
{
Book2_A*=%C; //%C contained name of each data set;
%C=;
}
You can refer to this page for row delete:
http://www.originlab.com/doc/LabTalk/ref/Delete-cmd
Best regards,
Jason Zhao
OriginLab Tech Service
Hello,
Thank you for reply!
Unfortunately, its not what i want.
*I have 2 different workbooks (book1 and 2) (or 1 book (book1) with 2 worksheets). These workbooks (or worksheets) incleed 2 column (A and B).
And i have one more workbook (for simple - book3 with 2 column) with important sens. I want multiply column B in first 2 workbooks (or 1 workbooks with 2 worksheets) at column B in workbook workbook with sens. I could do it with "Simple math", but i want it "in one click".
Book1_b*Book3_b, Book2_b*Book3_b.
*Thanks for the link, but i (whatever) dont understand how could i del special row.
Im knowing how del simple row:
|range ra = [%(page.name$)]%(layer.name$)![1]:[13];
del ra;|.
Alex
____________________
Add one more question:
How change a color of plots in these script?
"doc -e LB
{
plotxy iy:=(1,2) plot:=200 ogl:=[Graph1]1!;
layer.x.from = 1.1;
layer.x.to = 1.6;
layer.x.inc = 0.05;
layer.y.from = 0;
layer.y.to = 3000;
layer.y.inc = 300;
}"
Thanks |
| jasonzhao |
Posted - 11/19/2014 : 10:38:36 PM
Hello,
Please try the script below:
the script plus all datasets in book1 with book2_A, save results in boo2_A
win -a book1;// active book1
doc -e d // loop through all dataset in active sheet
{
Book2_A*=%C; //%C contained name of each data set;
%C=;
}
You can refer to this page for row delete:
http://www.originlab.com/doc/LabTalk/ref/Delete-cmd
Best regards,
Jason Zhao
OriginLab Tech Service |
|
|
