| T O P I C R E V I E W |
| coll@inia. |
Posted - 03/31/2016 : 3:19:14 PM
Origin Ver 2016 and 8.5 or 8.6. and Service Release (Select Help-->About Origin):
Operating System:win 7
I was surprised because an script that I use normally in Origin 2016 does not work on Origin 8.5 or 8.6
Apparently is due to different reasons according to the pop ups, but I think must be something else related with some misunderstanding of particular phrases
Could anyone help me?
Thanks, julio
Upps....Here is the script:
//bb1 first column
//nn number of columns to be fitted
//get number of first column
getnumber -s FirstColNumber bb1 (number of first column);
getnumber -s NumberOfCols nn (number of columns);
ff1=bb1+nn-1;
string pageName$ = page.name$; // get the window name
//frequency counts
freqcounts -r 2 irng:=col($(bb1):$(ff1)) inc:=0.08 center:=1 end:=0 freq:=1 count:=0 cumulcount:=0 rd:=[<input>]<input>;
//1st drawings of scater without showing
bb2=bb1+nn+1;
ff2=bb2+nn-1;
plotxy iy:=(col("Bin Center"),col($(bb2):$(ff2))) plot:=201 color:=1 ogl:= [<new template:= FitGraph name:=FitGraph>];//[%(graphName$)]Layer1!; //200 line plot
string graphName$ = page.name$; //get the layer name
set %C -w 500; // 1pts line active data set
set %C -k 21; //no symbols but in the graph
//FITTING
win -a %(pageName$);
For(ii=1;ii<=nn;ii++)
{
bb3=bb1-1+nn+1+ii; //col to be fit
bb4=bb1-1+2*nn+1+2*ii;//col to be filled with bin centers
ff4=bb4+1; //col to be filled with fitted
//type -c $(bb3);
col($(ff4))[C]$=col($(bb1-1+ii))[C]$; //name fitted column comments
fitpoly iy:=(col("Bin Center"),col($(bb3))) polyorder:=9 fixint:=1 intercept:=0 oy:=($(bb4):$(ff4)) -r 2;
};
//2nd fitted drawings
For(ii=1;ii<=nn;ii++)
{
bb2=bb1+nn+1;
bb3=bb1-1+nn+1+ii; //col to be fit
bb4=bb1-1+2*nn+1+2*ii;//col to be filled with bin centers
ff4=bb4+1; //col to be filled with fitted
plotxy iy:=((col($(bb1-1+nn+1)),col($(ff4)))) plot:=200 color:=$(ii) ogl:=[%(graphName$)]Layer1!; //[FitGraph1]
set %C -w 2000; //set width 4
};
//Final format worksheet
for(kk=1;kk<=ff4;kk++)
{
wks.col$(kk).digitmode=1;
wks.col$(kk).digits=2;
wks.col$(kk).width=4;
};
for(kk=nn+1;kk<=ff2;kk++)
{
wcellcolor $(kk) C:=color(230,230,230);
};
wcellcolor $(nn+1) c:=color(255,255,200);
//formatting graph
win -a %(graphName$); //FitGraph1;
layer1.x.from=0;
layer1.y.from=0;
Layer1.x.To=1;
Layer1.y.To=0,2;
For(jj=1;jj<=nn;jj++) //change FittedLineWidth to 4pts
{
range rr=1!$(nn+jj);
set rr -w 2000;
};
legendupdate;
legend.fsize=12;
//getnumber -s FitGraphNumber FT (number of the new FitGraph);
//page.longname$=FitGraph$(FT);
string FT$;
getnumber -s (FitGraphNumber) FT$ (NUMBER+NAME OF THE NEW GRAPH);
page.longname$=FitGraph %(FT$);
|
| 2 L A T E S T R E P L I E S (Newest First) |
| coll@inia. |
Posted - 04/01/2016 : 03:38:54 AM
Thank you Hideo,
That was one of the things the pop up says.
I also tested manually and you are right. I was just hoping that not to be the case!!!
It seems like I will have to design some way to go around that problem making a one by one process.........too much work!
Thank you again, julio |
| Hideo Fujii |
Posted - 03/31/2016 : 3:50:25 PM
Hi julio,
Not sure that whether this is the only problem, or not; but it seems freqcounts in the old 8.x version
accepts only one dataset.
Probably in a later version it was improved to accept more than one dataset.
In a nutshell, you may encounter any sort of problems to try the downward compatibility.
--Hideo Fujii
OriginLab
|
|
|
