| T O P I C R E V I E W |
| vailen |
Posted - 06/25/2003 : 02:43:20 AM
Hello,
I'am using version 7 and the RS232 module to read the data send from my instrument. It's sending 256 equidistant values in 512byte in the following way:
1. byte 00_hex ... FF_hex high byte of the 1. value
2. byte 00_hex ... FF_hex low byte of the 1. value
.
.
.
511. byte 00_hex ... FF_hex high byte of the 256. value
512. byte 00_hex ... FF_hex low byte of the 256. value
How do I get those data into a worksheet ?
I'am using
(Origin C example from "Origin7\OriginC\Samples\RS232.c" )
Thanks for any help,
vailen
Edited by - vailen on 07/01/2003 2:29:06 PM |
| 1 L A T E S T R E P L I E S (Newest First) |
| additive |
Posted - 06/30/2003 : 04:14:02 AM
hello vailen,
what RS232 module do you use?
Origin C example from "Origin7\OriginC\Samples\RS232.c"
or RS232 GUI for Origib V6.1 by ADDITIVE GmbH?
try to contact support@additive-net.de
regards
|
|
|
