T O P I C R E V I E W |
Engineer1 |
Posted - 01/08/2002 : 05:39:28 AM Hi fellows, does anybody know, if you can lengthen the line of a linear fit in the control settings (besides drawing a line with the line tool)? Thanks |
2 L A T E S T R E P L I E S (Newest First) |
rtoomey |
Posted - 01/09/2002 : 09:23:35 AM Alternatively, edit the "Range Margin" setting on the Operation tab. This one allows you to control how far past the original data the fit curve extends (on either side) by specifying a percent value. This would allow you to extend the fit curve past the original data, but not all the way to the ends of the X axis scale.
Note: You would need to uncheck the "Span X Axis" check box to use this feature.
- rtoomey
|
Lorraine |
Posted - 01/09/2002 : 09:04:09 AM You can use the Linear Fit tool to do this. Choose Tools:Linear Fit, then choose the Settings tab and select "Span X Axis" then go back to the Operation tab and hit the FIT button to run the linear fit.
Lorraine OriginLab Technical Support |