| T O P I C R E V I E W |
| StealthBadger |
Posted - 04/29/2013 : 06:28:38 AM
Hi,
I'm using OriginPro 9, and keep getting the same problem when trying to parameterise the X and Y values in a matrix. I select my ranges as shown below for the matrix in the "select dimensions and labels" window, and while I end up with a 40x41 matrix as desired, the values remain as being 1->40 and 1->41 respectively, rather than 100->4000 and -180 ->180.
Is this a known bug with a workaround, or am i doing something wrong here?
Cheers for any assistance! |
| 2 L A T E S T R E P L I E S (Newest First) |
| StealthBadger |
Posted - 05/01/2013 : 12:30:14 PM
Thanks! It was just that I didn't have the view options set up correctly. |
| matthew@originlab.com |
Posted - 04/29/2013 : 09:25:03 AM
Hi,
Just to be clear, is the issue that when you make a graph of the matrix, the x and y axes are following a scale from 1-40 and 1-41, or are just the column and row headers in the matrix sheet showing these values?
The first issue would be a bug, the second issue is just that by default, Origin displays column and row index values in the header, to change this go to View > Show X/Y.
Matthew
OriginLab |
|
|
