| T O P I C R E V I E W |
| kishoreg |
Posted - 05/31/2013 : 10:23:55 AM
Hi
Any body can help. How to modify the y axis to log scale.
I have atmospheric model which available in pressure levels. For better representation I have to show y axis in log scale.
thank you in advance,
kishore |
| 6 L A T E S T R E P L I E S (Newest First) |
| kishoreg |
Posted - 06/04/2013 : 03:47:22 AM
Thanks Meili
quote:
Originally posted by meili_yang
Hi,
We don't support add on.
If you are interested you might try to download a demo for 9.0 which is free, but you should notice there are some limitations. Otherwise I don't know how to do that in 8.0. Sorry about that.
http://www.originlab.com/index.aspx?go=Downloads/OriginEvaluation
Meili
OriginLab
kishore |
| meili_yang |
Posted - 06/03/2013 : 5:06:47 PM
Hi,
We don't support add on.
If you are interested you might try to download a demo for 9.0 which is free, but you should notice there are some limitations. Otherwise I don't know how to do that in 8.0. Sorry about that.
http://www.originlab.com/index.aspx?go=Downloads/OriginEvaluation
Meili
OriginLab |
| kishoreg |
Posted - 06/03/2013 : 4:35:53 PM
Yes, I am using origin 8. Is there any add on to get non-linear axis.
quote:
Originally posted by meili_yang
Hi Kishore,
I guess you are using a version lower than 8.5 since Origin starts to support nonlinear x and y axes such as log axes for contour plots from 8.5.
Meili
OriginLab
kishore |
| meili_yang |
Posted - 06/03/2013 : 3:17:55 PM
Hi Kishore,
I guess you are using a version lower than 8.5 since Origin starts to support nonlinear x and y axes such as log axes for contour plots from 8.5.
Meili
OriginLab |
| kishoreg |
Posted - 06/03/2013 : 03:51:40 AM
Hi Meili
I tried already this but that option is not for working for contour figure. When I did contour then the Scale type option fixed to 'Linear' and there is no chance to change it.
thanks
kishore
quote:
Originally posted by meili_yang
Hi Kishore,
Double click on y axis to open Axis dialog. Choose Log scale from Scale-Type. Once you changes the scale to Log, your data may become clustered since the y scale is different. There is a Rescale button on the right, or press Ctrl+R, which allows you to rescale to have a nice graph.
Hope it helps.
Meili
OriginLab
kishore |
| meili_yang |
Posted - 05/31/2013 : 12:02:56 PM
Hi Kishore,
Double click on y axis to open Axis dialog. Choose Log scale from Scale-Type. Once you changes the scale to Log, your data may become clustered since the y scale is different. There is a Rescale button on the right, or press Ctrl+R, which allows you to rescale to have a nice graph.
Hope it helps.
Meili
OriginLab |
