| T O P I C R E V I E W |
| b-1 |
Posted - 06/20/2013 : 04:44:55 AM
Origin Ver. and Service Release (Select Help-->About Origin): OriginPro 8.5.1 SR1
Operating System: Windows 7
Dear Origin experts,
In a 2D plot it is possible to fill the area under a curve with a gradient fill. Now I have 8 curves that I want to plot this way, but in 3D with some third variable in vertical direction.
The best - albeit not easy - way for this seems to be to place almost vertical matrices (surface type) under my data curves (3D scatter) and use level dependent limited mixing for coloration.
For one data curve and one matrix this works perfectly. I can see both, the data points and the matrix area beneath with a gradient-like fill. But when I put a second matrix into the 3D plot I get the error message: "Surface Intersection Disabled! All the matrix-based plots must be surface type and share exactly the same XY.". In addition, the two matrices are shown in the 3D plot but all the 8 data curves are invisible (although not hidden in plot properties). Since the XY plane contains the third variable, the matrices can't have the same XY. They are not meant to be above each other but side by side.
Is there a way to solve this problem and i.e. put 8 matrices side by side plus 8 3D-scatter curves into one 3D plot?
Thank you in advance for all your thoughts! |
| 7 L A T E S T R E P L I E S (Newest First) |
| b-1 |
Posted - 06/25/2013 : 05:44:27 AM
Hi Kathy,
thank you for these example images. Actually I get better results when using another computer (with slightly higher version of openGL).
With all this help from you it will become a really nice plot now. Thanks again for these fast and helpful solutions to my problems!
Best wishes
b-1 |
| Kathy_Wang |
Posted - 06/23/2013 : 10:01:35 PM
Hi,
Anti-aliasing improves the quality of the graph (both in screen display and exported graph). Basically, it makes the lines appear smoother.
I took two screenshots for the same 3D graph with and without anti-aliasing so that you may have an idea of this effect:
This image is without anti-aliasing:
This image is with anti-aliasing:
Kathy
Originlab |
| b-1 |
Posted - 06/21/2013 : 08:56:25 AM
Hi Kathy,
thank you very much for your helpful answers! The plot works/looks like intended when a really openGL-based graph is made.
However there is a new warning in the message log now: "WARN0010007: OpenGL version used by this Origin session is too low to support anti-aliasing."
The version shown in the 3D OpenGL Settings window is 2.1.0 - Build 8.15.10.2827. After installing the latest drivers for my graphics card this version of openGL stayed the same.
Although I don't notice any problems yet, might this influence the output graph?
Thank you so much!
b-1 |
| Kathy_Wang |
Posted - 06/21/2013 : 04:33:23 AM
Hi again,
I received your OPJ and replied via Email. The problem occurs because you're still having a non-openGL based 3D graph, either you can create a new 3D graph from the very beginning in 9.0 with openGL enabled (i.e. @ogl = 1), or you could convert from earlier versions.
Kathy
Originlab |
| Kathy_Wang |
Posted - 06/20/2013 : 10:18:06 PM
Hi,
Normally if you are using openGL 3D graphs (i.e. with Origin 9.0 or above and the system variable @ogl=1), you should not meet this error message.
Is it possible to share your OPJ file to us for further investigation? To do so, please click the Send File to Tech Support link in the top right corner of the forum main page and follow the instructions there.
Kathy
Originlab |
| b-1 |
Posted - 06/20/2013 : 07:29:46 AM
Hi Kathy,
thank you for your fast response. I now installed Origin 9.0 SR2. Plotting the matrices is much (!) faster now, but unfortunately the major problem remains.
If I hide one of the two matrices, I can see the 8 scatter curves and the remaining matrix, but as soon as two matrices are active only those can be seen and the scatter data disappears from the plot. Again there is the same error message from above.
Is there any workaround? Might the opj-file be corrupted (created with version 8.5.1)? |
| Kathy_Wang |
Posted - 06/20/2013 : 05:35:29 AM
Hi,
Intersecting surfaces from different X or Y is supported only from Origin 9.0 with OpenGL based 3D graphs, you can download the evaluation for 9.0 to have a try.
Kathy
Originlab |
