The Origin Forum

File Exchange

Try Origin for Free

The Origin Forum

All Forums

Origin Forum

Problem with ASCI import

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:

UserName:

Password:

Anti-Spam Code:

Format Mode:

Format:

Message:

* HTML is OFF
* Forum Code is ON

Smilies

[quote][i]Originally posted by SimpleSimonSays[/i]
[br]Origin Ver. and Service Release (Select Help-->About Origin): 9.0.0(64-bit) SR2 b87
Operating System: Windows 7 Pro

Hello, I am trying to import some simple ASCI .txt files into Origin. These files have 39 header lines with measurement information+comments, following tab seperated measurement data.

Auto header dedection failes with these and also preview of the header lines in import wizard stops at a certain point in these header lines.
Setting the header import settings manually results in a error message
 [quote][30.10.2013 11:49:27 impASC]
File "xxxx05230103000xxxx_w00_01.txt" is invalid![/quote]
I suppose that the problem is with some uncommon characters as the preview and header detection always stops at a certain line in these files.
Below I attached an example of these files.

Any idea how to import these into Origin?

Best regards
Simon

[hr]
Messdatum: 24-Jul-2013 12:00:17          
Prozess:                                 
Zelle: 0000000000000229xxxx              
Kommentar: xxx            
Bearbeiter: xxx                         
Messmethode: 4-Pkt                       
Messrichtung: + nach -                   
Zellfl�che [cm2]: 59.00                  
Effektive Zellfl�che [cm2]: 10.01        
Zellfl�che NC [cm2]: 10.01               
Leistung Sonne [W/m2]: 0                 
Vorbestrahlzeit [hh:mm]: 01:00           
Temperatur [�C]: 25.0                    
Diodenmodell: 1                          
Wiederholungsmessung: 0                  
Messdauer [sec]: 153.0777                
NPLC: 1                                  
Auto Zero: 1                             
Messprogrammversion: 2.4.5               
Matlab-Version: 7.5.0.342 (R2007b)       
                                         
Wirkungsgrad [%]: Inf                    
Effektiver Wirkungsgrad [%]: Inf         
Wirkungsgrad NC [%]: Inf                 
Leerlaufspannung [mV]: 2.68              
Kurzschlussstrom [mA]: 0.050594          
F�llfaktor: -0.42519                     
U_MPP [mV]: 0                            
I_MPP [mA]: ����                         
maximale Leistung [W]: 5.7652e-008       
Parallelwiderstand [kOhm]: 0.0017483     
Dunkelstrom Diode 1 [mA]: -0.003         
Diodenidealit�tsfaktor Diode 1: 2        
Serienwiderstand Diode 1 [Ohm]: 4593.6605
Dunkelstrom Diode 2 [mA]: 0              
Diodenidealit�tsfaktor Diode 2: 0        
Serienwiderstand Diode 2 [Ohm]: 0        
fval: Inf                                
fval normiert auf Messwertanzahl: Inf    
-2.9129	-1931.2
-2.9115	-1783.3
-2.9102	-1781.5
-2.9088	-1780.4
-2.9075	-1779
-2.9061	-1777.4
-2.9048	-1776.3
-2.9034	-1774.8
-2.9021	-1773.4
-2.9007	-1771.6
-2.8994	-1769.6
-2.898	-1767.4
-2.8967	-1762.8
-2.8953	-1759.8
-2.894	-1768.2
-2.8926	-1768.4
-2.8913	-1767.4
-2.8899	-1766.3
-2.8886	-1765.2
-2.8872	-1764
-2.8859	-1763
-2.8845	-1761.8
-2.8832	-1760.8
-2.8818	-1759.9
[/quote]

Check here to include your profile signature.
Check here to subscribe to this topic.

T O P I C R E V I E W
SimpleSimonSays	Posted - 10/30/2013 : 07:08:31 AM Origin Ver. and Service Release (Select Help-->About Origin): 9.0.0(64-bit) SR2 b87 Operating System: Windows 7 Pro Hello, I am trying to import some simple ASCI .txt files into Origin. These files have 39 header lines with measurement information+comments, following tab seperated measurement data. Auto header dedection failes with these and also preview of the header lines in import wizard stops at a certain point in these header lines. Setting the header import settings manually results in a error message quote: [30.10.2013 11:49:27 impASC] File "xxxx05230103000xxxx_w00_01.txt" is invalid! I suppose that the problem is with some uncommon characters as the preview and header detection always stops at a certain line in these files. Below I attached an example of these files. Any idea how to import these into Origin? Best regards Simon Messdatum: 24-Jul-2013 12:00:17 Prozess: Zelle: 0000000000000229xxxx Kommentar: xxx Bearbeiter: xxx Messmethode: 4-Pkt Messrichtung: + nach - Zellfl�che [cm2]: 59.00 Effektive Zellfl�che [cm2]: 10.01 Zellfl�che NC [cm2]: 10.01 Leistung Sonne [W/m2]: 0 Vorbestrahlzeit [hh:mm]: 01:00 Temperatur [�C]: 25.0 Diodenmodell: 1 Wiederholungsmessung: 0 Messdauer [sec]: 153.0777 NPLC: 1 Auto Zero: 1 Messprogrammversion: 2.4.5 Matlab-Version: 7.5.0.342 (R2007b) Wirkungsgrad [%]: Inf Effektiver Wirkungsgrad [%]: Inf Wirkungsgrad NC [%]: Inf Leerlaufspannung [mV]: 2.68 Kurzschlussstrom [mA]: 0.050594 F�llfaktor: -0.42519 U_MPP [mV]: 0 I_MPP [mA]: �� maximale Leistung [W]: 5.7652e-008 Parallelwiderstand [kOhm]: 0.0017483 Dunkelstrom Diode 1 [mA]: -0.003 Diodenidealit�tsfaktor Diode 1: 2 Serienwiderstand Diode 1 [Ohm]: 4593.6605 Dunkelstrom Diode 2 [mA]: 0 Diodenidealit�tsfaktor Diode 2: 0 Serienwiderstand Diode 2 [Ohm]: 0 fval: Inf fval normiert auf Messwertanzahl: Inf -2.9129 -1931.2 -2.9115 -1783.3 -2.9102 -1781.5 -2.9088 -1780.4 -2.9075 -1779 -2.9061 -1777.4 -2.9048 -1776.3 -2.9034 -1774.8 -2.9021 -1773.4 -2.9007 -1771.6 -2.8994 -1769.6 -2.898 -1767.4 -2.8967 -1762.8 -2.8953 -1759.8 -2.894 -1768.2 -2.8926 -1768.4 -2.8913 -1767.4 -2.8899 -1766.3 -2.8886 -1765.2 -2.8872 -1764 -2.8859 -1763 -2.8845 -1761.8 -2.8832 -1760.8 -2.8818 -1759.9
2 L A T E S T R E P L I E S (Newest First)
greg	Posted - 12/09/2013 : 09:44:09 AM This problem has been fixed in Origin 9.1 SR1.
greg	Posted - 10/30/2013 : 2:03:41 PM This is a bug. The Preview in Import Wizard and the ASCII import code are both tripping up on �� in the file. For the moment, your only option seems to be opening the file in some editor and copypaste to Origin. Entered into our bug database.

The Origin Forum

Snitz Forums 2000