| T O P I C R E V I E W |
| macaorigin |
Posted - 06/09/2014 : 03:54:41 AM
Hi,
I have a very basic question but I haven't been able to find the answer on the internet and forum...
I have an ASCI image, and I am trying to take some parts of it, keeping the dimensions, but I get an empty matrix.
What I do:
Import the .dat.
Convert it to matrix (direct).
View as image.
Set the dimensions.
Select the region I want with the little green rectangle tool.
Then click create new.
A new (empty :( ) matrix is created.
I am working with Origin 8 SR1. It used to work that way when using Origin7.5, but Origin8 works in a different way with matrices and I haven't figured out yet how to create new matrices from a given one.
Thanks in advance for your help.
Maria
(PS: What I want to do is create a 3D graph of a region of the data matrix, where the z axis represents the value of the matrix in each coordinate)
Origin Ver. and Service Release: OriginPro8 SR1 v8.07773(B773)
Operating System: WindowsXP |
| 3 L A T E S T R E P L I E S (Newest First) |
| macaorigin |
Posted - 06/09/2014 : 06:01:55 AM
I have upgraded to SR6 and it seems to work fine. Thanks a lot for your help! |
| macaorigin |
Posted - 06/09/2014 : 05:21:51 AM
Thank you for your answer. I will try to upgrade to see if that solves my problem.
I have made more attempts and I have seen that the problem I have with the matrices doesn't happen with a matrix without dimensions. But when I set the dimensions, I can't cut the matrices.
I am going to upgrade and check it again. Thank you, Sean! |
| SeanMao |
Posted - 06/09/2014 : 04:54:03 AM
Hi Maria,
I tried to reproduce your problem by using a sample file in System Path+"\Samples\Matrix Conversion and Gridding\Direct.dat" in Windows XP with Origin 8.0SR6, I successfully obtained the matrix from the selected region rather than an empty matrix as you have described.
I am not sure what might happen to your case, but I think you'd better upgrade to 8.0 SR6 step by step by following the link below since in 8.0SR6 many unknown problems are fixed:
http://www.originlab.com/index.aspx?go=SUPPORT/ServiceReleases
If the problem persists, please feel free to contact us again!
Thanks!
Regards!
Sean
OriginLab Tech. Service
|
|
|
