| T O P I C R E V I E W |
| maxxlr8 |
Posted - 07/03/2014 : 01:26:03 AM
Origin Ver. 8 and Service Release 0 (Select Help-->About Origin):
Operating System: Windows 7
Dear Originlab Forum,
I have used Analysis>Fitting>Fit Multi Peaks to fit 6 peaks
However, after fitting, it does not account the left most peak of the graph
Can anyone lend me your help?
Thank you
Max |
| 3 L A T E S T R E P L I E S (Newest First) |
| jasonzhao |
Posted - 07/04/2014 : 02:37:36 AM
Hi Max,
Please Highlight column Y in the worksheet then select Analysis: Signal Processing: Smooth from the Origin menu; you can also refer to tutorial below:
http://www.originlab.com/doc/Tutorials/Smoothing.
Best regards,
Jason Zhao
OriginLab Tech Service |
| maxxlr8 |
Posted - 07/04/2014 : 12:40:26 AM
Dear Jason,
Thank you for replying.
May I know how to conduct a smooth for this spectrum? 
Yes, the spectrum is quite noisy.
Thank you
|
| jasonzhao |
Posted - 07/03/2014 : 08:33:13 AM
Hi Max,
I assume you use the Analysis:Peak and Baseline:Multiple Peak Fit for peak fitting. The fitting results can be improved by ways below:
1. Conduct a smooth for the spectrum before fitting
2. Select the peaks position manually before fitting, mark six positions you assume to be the peak carefully before fitting (especially the left one).
3. If the results still cannot meet the needs, please send your data to tech@originlab.com and let us check it.
Best regards,
Jason Zhao
OriginLab Tech Service
|
|
|
