T O P I C R E V I E W |
bo_liubo |
Posted - 05/09/2015 : 02:46:40 AM Origin Ver. and Service Release (Select Help-->About Origin): 8.6 Operating System: win7 Hello, As shown below, I want to extract the peak and valley values from a column in the worksheet (I have tried worksheet script but failed to finish it), how can I do that? could you please give me any suggestions? thanks a lot
|
2 L A T E S T R E P L I E S (Newest First) |
bo_liubo |
Posted - 05/11/2015 : 07:18:00 AM Hi, I have solved this problem via the same method as yours, and thank you very much!
quote: Originally posted by SeanMao
Hi,
The simplest way is to use a Quick Peaks Gadget, first make a plot of the curve you want to fit and then go to menu Gadgets: Quick Peaks to open dialog.
Options need to set:
1. In Baseline tab, select "Min&Max" as Mode to find positive peaks using min Y and negative peaks using max Y. 2. In Find Peak tab, select (X,Y) of Peaks as "Label" drop-down list under "Peak Display:Peak Label" node. 3. Click "OK" to apply the settings.
Then, you will see the results as shown below:
If you want to further control the fitting process, you can use Peak Analyzer feature in Origin from this tutorial:
http://www.originlab.com/doc/Tutorials/Peak-Analysis
Regards!
Sean
OriginLab Tech. Service
|
SeanMao |
Posted - 05/11/2015 : 02:44:50 AM Hi,
The simplest way is to use a Quick Peaks Gadget, first make a plot of the curve you want to fit and then go to menu Gadgets: Quick Peaks to open dialog.
Options need to set:
1. In Baseline tab, select "Min&Max" as Mode to find positive peaks using min Y and negative peaks using max Y. 2. In Find Peak tab, select (X,Y) of Peaks as "Label" drop-down list under "Peak Display:Peak Label" node. 3. Click "OK" to apply the settings.
Then, you will see the results as shown below:
If you want to further control the fitting process, you can use Peak Analyzer feature in Origin from this tutorial:
http://www.originlab.com/doc/Tutorials/Peak-Analysis
Regards!
Sean
OriginLab Tech. Service
|
|
|