| T O P I C R E V I E W |
| saikhan82 |
Posted - 04/04/2017 : 10:23:35 PM
Hi,
I am new to ORIGIN. I am trying to plot 3D bar graph.
I would like to know how to control the scaling along z-axis for negative and positive values.
I mean a plot should start from zero, but it starts from negative values.
Thanks,
 |
| 3 L A T E S T R E P L I E S (Newest First) |
| saikhan82 |
Posted - 04/11/2017 : 10:52:15 PM
Thank you so much for your comments.
I should upgrade the version. |
| cpyang |
Posted - 04/06/2017 : 6:54:46 PM
You didn't say which version of Origin, and the image you posted seem to be made with an old version, so I suggest you download the latest and try. I made this using 2017,
Sure enough, this plot cannot be made out of the box with one click, so
1. Make sure the bars are based from zero, see
2. Add an extra semi transparent ZX plane at Y=0, see
CP
|
| arstern |
Posted - 04/05/2017 : 09:03:01 AM
Hi,
To edit the axis, double click on the z-axis which will open the Axis dialog box. Here you can edit x-y-z axis.
-On the left corner the z axis should be selected.
-Select Scale.
-Input From ______ to ____________. Here you can input your axis range.
For more information refer to the link below:
http://www.originlab.com/doc/Origin-Help/AxesRef-Scale
--Aviel Stern
OriginLab |
|
|
