| T O P I C R E V I E W |
| espenhjo |
Posted - 05/18/2004 : 02:34:15 AM
Hi,
I have Origin 7.5 SP2 with the NMR addon. Now I can't define my own functions in NLSF. When I try to use the funciton I get the message: Error 28037. Likely caused by errors in user defined formula or poor parameter initialization. And, this is not the case!
I plot an exponential function y=P1+exp(P2/x)and then define a function in NLSF that is similar to that. Then I try to fit my dataset with this function. NLSF then makes a good fit, and gives the correct parameters, but at the end of each iteration I get the error message, and there are no error margins or dependencies for the parameters.
The built in functions work normally.
Espen Johannessen
Edited by - espenhjo on 05/18/2004 05:41:42 AM |
| 1 L A T E S T R E P L I E S (Newest First) |
| Mike |
Posted - 05/19/2004 : 09:11:53 AM
Hi Espen:
It is hard to say what the problem may be. Sometimes these NLSF error messages are instructive and sometimes they are triggered by a seemingly unrelated problem. Your best bet would be to contact your Origin technical support representative (which in your case is DoubleClick AB) and have them take a look at your fitting function and your data (if that is possible).
Regards,
Mike
OriginLab |
|
|
