| T O P I C R E V I E W |
| mej |
Posted - 11/10/2004 : 07:59:57 AM
Origin Version 6.1 Pro
Operating System: win 2000
Hi everybody
I modified the maximum points per curves (from 3000 to 200 points) (Format:layer:size/speed) but when i print the curve the number of point remains to 3000 points  .
Mej |
| 5 L A T E S T R E P L I E S (Newest First) |
| mej |
Posted - 11/22/2004 : 04:51:29 AM
Thank you Mike |
| Mike |
Posted - 11/12/2004 : 11:44:20 AM
Yes, mej, there are 3 places in which you can apply Speed Mode settings: On screen, in the printed graph, and in the exported graph (by "exported", I mean when you do either an Edit:Copy Page or a File:Export Page).
To enable Speed Mode settings for export, open the Plot Details dialog box (Format:Page), click the Miscellaneous tab, and select If speed mode is enabled for display, apply to graphic export as well. This should take care of it for you.
Mike
OriginLab |
| mej |
Posted - 11/12/2004 : 10:44:39 AM
Hi Mike
It is now Ok to apply my Speed Mode settings to my printed graph.
However, the same problem is present when i copy my graph (copy page) and paste it in word.
Mej |
| Mike |
Posted - 11/10/2004 : 11:17:02 AM
Hi Mej:
To apply your Speed Mode settings to your printed graph, open the Print dialog box (File:Print), enable the Worksheet data, skip points check box, then enter Maximum points per curve (see my post on this thread)->http://www.originlab.com/forum/topic.asp?TOPIC_ID=3119).
Mike
OriginLab |
| Hideo Fujii |
Posted - 11/10/2004 : 11:13:17 AM
Hi Mej,
When you print your graph, you can set up the "Maximum points per curve" in the Print dialog box. Separation of this specification from the number of points for display helps to prevent accidentally creating a misleading graph printout.
Hideo Fujii
OriginLab
|
