| T O P I C R E V I E W |
| metroid02 |
Posted - 02/19/2018 : 03:40:33 AM
Hello, quick question about the Heat Map ability. So say I have a 41x41 Matrix and I make a heat map of it. I would now like to draw a line along any axis/direction and would like to get an intensity plot for that line and only that line. In my case I have a heatmap from a Cu grid and would like to determine the lattice constants this way.
I can get the heatmap to work well, but this last part about drawing a line and getting a normal line graph from it is something that eludes me. Can anyone help me out? |
| 3 L A T E S T R E P L I E S (Newest First) |
| metroid02 |
Posted - 02/19/2018 : 12:23:48 PM
Thanks to both your swift responses! You guys solved my problem. |
| Hideo Fujii |
Posted - 02/19/2018 : 11:23:00 AM
Hi metroid02,
Aviel's way should works. Also, you may easily try the following:
1) Create a regular Heatmap from your matrix, and copy the graph's format.
2) Create a Contour Profile, and apply the format (all).
Does it work? If it worked, could you show me how it looks like, if you don't mind. I would
like to see just for my curiosity.
--Hideo Fujii
OriginLab
|
| arstern |
Posted - 02/19/2018 : 11:18:27 AM
Hi,
Please try the plotting with Contour Profile.
Select Plot -> Select Profile -> Select Contour Profiles
With the graph plotted you can add, move, and delete profile lines in the horizontal and vertical direction.
Thanks
Aviel
OriginLab |
|
|
