| T O P I C R E V I E W |
| Ajrash |
Posted - 02/28/2018 : 8:13:21 PM
Hi all,
I really need an assistance in this matter and thanks in advance for your attention.
I would like to draw data of horizantal tube, however, the referece point (0 distance) is the middle of the tube.
I found the Symmetrical figures as the best match for what I wont.
The issues are:
1)I couldn't find the option of symmetrical figures in OriginPto, or atleat not clear.
2) in one of the complix and not practical available methods, the Symmetrical figures the data on the left of referecen point has to be in (-), and I would like to show it in (+) as in coorepmding to reference point.
Could you please advice.
Thnaks
AJ |
| 1 L A T E S T R E P L I E S (Newest First) |
| AmandaLu |
Posted - 03/01/2018 : 02:51:28 AM
Hi,
I suppose your data is like
-5 -5
-4 -4
-3 -3
-2 -2
-1 -1
1 1
2 2
3 3
4 4
5 5
And you want to plot it like the following
1. To move the Y axis to the middle,
a. Double click on Y axis to open the Axis dialog.
b. On Line and Ticks tab, set Line > Axis Position = At Position, Percent/Value = the reference point.
2. To make the left part positive, use Set Column Values to calculate the absolute values
Thanks,
Amanda
OriginLab Technical Service
|
|
|
