| T O P I C R E V I E W |
| rezahasi1 |
Posted - 10/04/2005 : 07:08:31 AM
Origin Version (Select Help-->About Origin): 7.5 SR5
Operating System: WIn XP
Hi,
I want to use xtick label as [1 10 20 50 100 500 1000 2000], which is a log-axis. But I can not do this. CAN NOT able to set using Custom tick label option. Is there any way I could do this?
I am looking to hear from you. Thank you
Reza |
| 5 L A T E S T R E P L I E S (Newest First) |
| rezahasi1 |
Posted - 10/06/2005 : 01:47:18 AM
Hi! I could ONLY use it for LINEAR AXIS. How could I make it workable when X-axis is plotted as log10?
Thanks for your help.
REza
 |
| easwar |
Posted - 10/05/2005 : 10:36:25 AM
Hi,
You don't have to add a second layer - you can just stay with one layer. All you need is an additional column with the numbers where you want the x ticks to be positioned, and then issue one script command, such as shown in the picture below.
Easwar
OriginLab
|
| rezahasi1 |
Posted - 10/04/2005 : 11:26:24 PM
hi Mr Hideo Fujii,
I am little wrong. Things can be done as described here:
http://www.originlab.com/www/support/resultstech.aspx?language=english&ID=921 (method 2), if I do some other operation
But as I said, the procedure is rather Complex. Is there any script that can do this and additionally:
hide main bottom x-axis (but not tick marks) and copy the layer2 top axis to layer2 bottom axis?
Thanks |
| rezahasi1 |
Posted - 10/04/2005 : 11:14:48 PM
hi Mr Hideo Fujii,
I could not make them workable.
I tried as described on those links, but NOT get the ones I am looking for.
Note that I want the nonlinear custom x-axis on the Bottom axis, which can't be done using these procedure (unless I did not understand exactly). This is mainly because that I could not find any option to add a linked bottom x-axis. By the way, the procedures are also tedious.
Is there any workaround? thank you very much
REza |
| Hideo Fujii |
Posted - 10/04/2005 : 12:56:24 PM
Hello Reza,
The following article may be helpful to answer your question:
http://www.originlab.com/www/support/resultstech.aspx?language=english&ID=921
or
http://www.originlab.com/www/support/resultstech.aspx?ID=1018&language=English
--Hideo Fujii
OriginLab
|
