| T O P I C R E V I E W |
| EpithetonOrnans |
Posted - 03/17/2020 : 12:05:33 PM
Origin Ver. and Service Release OriginPro 2018:
Operating System: Windows10
Hi :)
I'm tying to create a plot where different groups of line-plots are stacked with a group-specific offset, e.g. all members of groupe A have an offset of 100, all members of group B an offset of 200 etc.
I have tried to use "Stacked Lines by Y Offsets" in conjunction with subgrouping as specified in the online help, but this simply does not work at all.
Thanks in advance! |
| 3 L A T E S T R E P L I E S (Newest First) |
| YimingChen |
Posted - 03/18/2020 : 10:28:59 AM
Then you will have to upgrade your Origin.
If you have same number of curves for each group, you may still use the Constant to set gaps between groups. Check the hint below Constant. Thank you.
James |
| EpithetonOrnans |
Posted - 03/18/2020 : 05:27:28 AM
Hi James,
Thanks for your reply. Unfortuntly, the option "Offset between subgroup (for constant/auto)" does not show in my plot details. My Origin Version is OriginPro2018 (9.5.).
regards
EpithetonOrnans |
| YimingChen |
Posted - 03/17/2020 : 4:25:48 PM
Hi,
Please make the following settings and see if it works.
James |
