| T O P I C R E V I E W |
| alliceinw0 |
Posted - 02/20/2024 : 3:10:20 PM
Hello,
I am plotting my data on a 3x3 multi-panel plot. I want to change the position of a specific layer. However, when I try to do so, the position of all other layers changes, as well. Is there a workaround this? |
| 3 L A T E S T R E P L I E S (Newest First) |
| Echo_Chu |
Posted - 12/03/2024 : 10:46:19 AM
Origin 2025 supports "swap" button to change the position of layers. That should work for your needs |
| alliceinw0 |
Posted - 02/21/2024 : 08:33:28 AM
quote:
Originally posted by snowli
Please try Graph: Layer Management.
Go to Size/Position tab.
Choose Swap radio
Then set the two layers you want to swap (First Layer and Second Layer)
Please make sure click Apply once.
Then click OK.
See how Layer Management dialog works on https://www.originlab.com/doc/en/Origin-Help/Layer-Management-Quick-Start
If still not working, could you share the opju?
Thanks, Snow
Thank you, I was able to have the desired result through Layer Management. |
| snowli |
Posted - 02/20/2024 : 5:32:55 PM
Please try Graph: Layer Management.
Go to Size/Position tab.
Choose Swap radio
Then set the two layers you want to swap (First Layer and Second Layer)
Please make sure click Apply once.
Then click OK.
See how Layer Management dialog works on https://www.originlab.com/doc/en/Origin-Help/Layer-Management-Quick-Start
If still not working, could you share the opju?
Thanks, Snow |
