The Origin Forum

File Exchange

Try Origin for Free

The Origin Forum

All Forums

Origin Forum

project 3d plot to 2d

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:

UserName:

Password:

Anti-Spam Code:

Format Mode:

Format:

Message:

* HTML is OFF
* Forum Code is ON

Smilies

Check here to include your profile signature.
Check here to subscribe to this topic.

T O P I C R E V I E W
Moumou	Posted - 04/04/2024 : 07:28:10 AM I have plotted a 3D graph and would like to project the plotted graph onto the three planes: xy, xz, and yz, similar to the attached image.
9 L A T E S T R E P L I E S (Newest First)
Moumou	Posted - 04/08/2024 : 12:55:56 PM Thank you very much, there is very helpful.
YimingChen	Posted - 04/08/2024 : 11:24:03 AM Please watch the video below for steps to add yz profile curve. The X,Y of the curve are calculated by making changes to the 3D parametric function where v is now fixed to pi. (1/(G+(((M-A)-(1/2)G)(1-cos(t)^2))+(2(M+F-2B-G)cos(t)^2(1-cos(t)^2))))cos(v)sin(t) (1/(G+(((M-A)-(1/2)G)(1-cos(t)^2))+(2(M+F-2B-G)cos(t)^2(1-cos(t)^2))))cos(t) quote: Originally posted by Moumou* Thank you very much for your help, but how can you do this.
Moumou	Posted - 04/08/2024 : 10:44:40 AM Thank you very much for your help, but how can you do this.
YimingChen	Posted - 04/08/2024 : 09:08:29 AM Please refer to the attached project file. You then need to manually calculate the data of the profile lines by making 2D parametric plot. You need to fix the angle u at pi/2 to obtain the xy profile curve, fix v at pi, 2pi to obtain the yz, xz profile curve. https://my.originlab.com/ftp/forum_and_kbase/Images/3D%20wall%20YM.opju James
Moumou	Posted - 04/06/2024 : 1:11:16 PM Hi all To achieve the same results as you, I must use the 2024 version, but this does not provide what I need (like attached image). Thank you YimingChen.
Moumou	Posted - 04/06/2024 : 07:37:13 AM Thanks again I followed all the steps indicated, but when I click on duplicate (Batch plotting) I cannot find the files (FUNC1 ....). I use Origin 2021.
YimingChen	Posted - 04/05/2024 : 11:55:52 AM It looks like the profile apps don't work on 3D parametric plot. The best I can do is to generate another 3 plots, but set the corresponding x,y and z to constant. See below
Moumou	Posted - 04/04/2024 : 11:00:50 AM Thank you very much, YimingChen, for your answer. I followed your instructions but when I click on the 3D Wall Profile icon nothing happens. In attached my origin file. https://my.originlab.com/ftp/forum_and_kbase/Images/3D%20wall.opju
YimingChen	Posted - 04/04/2024 : 08:34:34 AM Please use these two apps to get the profile data. https://www.originlab.com/FileExchange/details.aspx?fid=318 https://www.originlab.com/FileExchange/details.aspx?fid=301 James

The Origin Forum

Snitz Forums 2000