| T O P I C R E V I E W |
| kist-europe |
Posted - 12/18/2007 : 05:35:57 AM
Hello everyone,
I am a beginner with Origin 6.0. What I want to do is to transfer the AutoCAD data to Origin.
The AutoCAD data could be saved as the following data: *.wmf, *.sat, *.stl, *.eps, *.dxx, *.bmp, *.3ds, *.dwg, *.dxf.
But none of them fits for the data which can be imported to the Origin.
Could you give me some advice to solve the problem? What I want is only to get the structure from AutoCAD and show it on Origin.
For example: I draw the rectangle in AutoCAD and transfer the data to Origin so that I could get the same structure in Origin.
Thank you!
|
| 5 L A T E S T R E P L I E S (Newest First) |
| Mike Buess |
Posted - 12/21/2007 : 08:45:11 AM
I think you mean Origin 6.1 but am still not sure what you mean. You've probably already noticed that there is no good way to visualize a matrix in Origin 6.1 so I don't see how importing as *.wmf will help.
Mike Buess
Origin WebRing Member |
| kist-europe |
Posted - 12/21/2007 : 04:02:31 AM
Thanks for your answer.
And do you think it is possible that I draw a circle in AutoCAD and save as *.wmf. And then I import it to Origin 6.0 to get coordinates of the points which are on the circle?
Because later I would put other pattern on this structure(circle). So I need a reference point to make the Structure and Pattern together. That is why I want to get the coordinates points of the circle.
Regards,
Kist-europe |
| Mike Buess |
Posted - 12/19/2007 : 12:06:40 PM
If the figure is B&W then I suspect that the matrix cells are 0 or 255, not all 0. I have no problem importing *.bmp or *.wmf to O61.
Mike Buess
Origin WebRing Member |
| kist-europe |
Posted - 12/19/2007 : 09:43:43 AM
I have tried with Origin 6.1 to Import Image (*.bmp and *.wmf)to a matrix.
It works, but all the elements in the matrix are 0.
Could you give me some more advice about it?
Thank you.
Kist-europe |
| Mike Buess |
Posted - 12/18/2007 : 12:29:31 PM
In Origin 6.1 or higher you can Import Image (*.bmp or *.wmf) to a matrix, but that's not available in Origin 6.0. If you just want to show the image in Origin then copy from AutoCAD or a graphics program and paste to a graph, layout or worksheet window. Otherwise you can digitize a printout of the image with this Origin addon...
http://www.originlab.com/fileexchange/details.aspx?fid=7
Mike Buess
Origin WebRing Member |
