| T O P I C R E V I E W |
| wb072 |
Posted - 09/03/2009 : 6:23:01 PM
Hi there,
I would like to plot a contour on the ternary diagram. I work around by adding a contour plot as another layer on the ternary diagram as shown in the picture below. The problem is I can't remove the contour area outside the ternary diagram. Can anybody help me.
Thank you,
wb072
 |
| 2 L A T E S T R E P L I E S (Newest First) |
| wb072 |
Posted - 09/11/2009 : 10:47:43 AM
Please help me solve this problem. Thank you |
| larry_lan |
Posted - 09/04/2009 : 01:50:34 AM
Hi:
The question is, why you do like that?
In your example, I think you created a contour and a ternary plot respectively, and merged them, right? In Origin, We plot 2D contour on XY orthogonal coordinates, while plot ternary on XYZ non-orthogonal coordinates. Overlapping two different coordinates doesn't make scenes.
So I guess you want a Ternary Contour plot. This kind of plot requires 4 data columns, X, Y, Z and F, where F is the contour value at the point (X, Y, Z). We have implemented Ternary Contour in the next version, Origin 8.1, which will be released later.
Thanks
Larry
OriginLab Technical Services |
|
|
