| Author |
 Topic  |
|
|
Dabai
China
1 Posts |
 Posted - 12/23/2024 : 1:58:19 PM
|
Origin Ver. and Service Release (Select Help-->About Origin):
OriginPro 2024b (64-bit)
10.1.5.132
Operating System:Windows 11
雷达图分组显示不全，只有部分可以分组，有一组分不出来，如图，SSP1与SSP5分不开，不知道什么问题
 |
Edited by - Dabai on 12/23/2024 2:04:53 PM |
|
|
snowli
USA
1426 Posts |
Posted - 12/23/2024 : 9:00:21 PM
|
Hello,
Our built-in radar always connects end to begin. I created ORG-30464 to see if we can improve it when subset is specified.
For now, you can choose Tools: Template Center... to download an extended template "Circular Radar Chart".
Then
1. with nothing selected in worksheet, choose Plot: Extended Template: Circular Radar Charts. Or from Plot: Template Library, check Extended Template to load it.
2. In Plot Setup dialog that opens, choose Line+Symbol as plot type.
Set <autoX> as Theta, set B, C, D, E as R and click OK.
3. Choose Format: Axis: X Axis to open the Axis dialog. Set Circle End Value 46, "To" value 46. Go to Tick Labels tab. Set Dataset Name as Column F. Click OK.
4. Double click the plot to open Plot Details. With 1st plot selected on left panel, go to Line tab. Uncheck "Enable" checkbox below Fill Area under Curve. Uncheck Connect Begin and End.
5. Go to Subset tab, choose Enable Subset: By Column and choose Column F.
6. Go back to Line tab, check Connect within Subset.
https://my.originlab.com/ftp/forum_and_kbase/Images/circular_radar.opju
Thanks, Snow |
 |
|
| |
Topic |
|
|
|
雷达图分组