| Author |
 Topic  |
|
|
OndrejM
Australia
Posts |
 Posted - 04/20/2008 : 8:04:57 PM
|
Hi Guys,
Do you know whether is it possible to create polar net (polar stereographic net? (see picture below). Note that the vertical and horizontal scales go from 0 to 90 degrees but not with equidistant step, (that's the problem,... )
Cheers
Ondrej
 |
|
|
Deanna
China
Posts |
Posted - 04/20/2008 : 10:25:24 PM
|
Hi Ondrej,
You can create a polar plot and then enable both the horizontal and vertical gridlines with the Grid Line tab of the Axis Properties dialog, which can be opened by double-clicking on the axis. To set the steps, please use the Scale tab of the Axis Properties dialog.
Deanna
OriginLab Technical Services |
 |
|
|
OndrejM
Australia
Posts |
Posted - 04/20/2008 : 11:03:01 PM
|
Hi Deanna,
Sorry, I probably confused you, but my problem are not lines, problem is that in my picture (polar stereographic projection) are both axis from 0 to 90 degrees (that is no problem), but the axis shouldnt be linear, (e.g. speaking in millimetres if 10 degrees on X-axis is 10mm it doesnt mean that 40 degrees on X-axis will be 40mm), I dont know if you see what I mean, the best is to look at the picture,
Many Thanks
Ondrej
|
|
|
|
Deanna
China
Posts |
Posted - 04/21/2008 : 03:56:55 AM
|
Hi Ondrej.
There are no tick labels in the picture. Therefore we don't know how the scales change.
Did you try different TYPEs in the Scale tab of the Axis Properties dialog?
Deanna
OriginLab Technical Services |
|
|
| |
Topic |
|
|
|
polar net